PORSCHE 911 GASKET EXHAUST
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Known as: exhaust manifold, gasket, pipe
View/Change Diagram
Brombacher 997 tt stainless steel race pipes
Facts:
- + 35 crank hp & + 25 crank torque
- 3" tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- bolts up to the turbochargers, replacing both the cats and the muffler.
- reduces turbo lag and backpressure.
- exhaust tips are not included! Stock tips will fit.
- intoxicating growl at idle, partial throttle and wide open throttle.
- made in Germany
- programming or o2 sensor simulators are necessary, as the lack of catalytic converters will throw the check engine light. (see part numbers below)
Figures:
Genuine:
Engine - 6 cylinder...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $456.50
Make a selection
Improve sound and performance by decreasing exhaust backpressure with our sport catalytic kits. This kit utilizes high quality, 100 cell German tri-metallic cats and includes all the necessary gaskets and hardware for installation. Please note: please ensure what type of flanges you have prior to ordering.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
From $3,052.03
Make a selection
Improve sound and performance by decreasing exhaust backpressure with our sport catalytic kits. This kit utilizes high quality, 100 cell German tri-metallic cats and includes all the necessary gaskets and hardware for installation. Please note: an ecu upgrade will be necessary. Please ensure what type of flanges you have prior to ordering.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
From $2,677.39
Make a selection
Loud, low, deep tones with exaggerated turbo whistling and sinister gurgling and crackling off throttle. By far the best sound you can get out of your turbo, not to mention being able to shoot flames! The only real drawback is the drone in the cabin which we try to minimalize by stepping down the diameter in 3 stages. - + 35 crank hp & + 25 crank torque - 3 tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage. - weighs 7 lbs. (3,1 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - bolts up to the turbochargers, replacing both the cats and the muffler. - reduces turbo lag and backpressure. - exhaust tips are not included! Stock tips will fit. - intoxicating grow...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $444.40
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quali...(choose a part on the right to read more)
General Fitment 911 1989-94
$7,854.00
Make a selection
Brombacher exhausts are engineered for the discerning Porsche® owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, all of our exhaust systems meet the standards of the German independent testing agency TUV; whose quality standards are among some of the strictest in the world.
Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In addi...(choose a part on the right to read more)
General Fitment 911 1978-83 930 1975-77 911 1974-77 911 1984-86 911 1987-89
$6,891.50
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- bypass-catalytics
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming necessary 2nd gen
The FVD...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $3,177.67
Make a selection
Our street version muffler set is perfect for those more concerned with a quality Porsche flat 6 sound rather than just an increase in decibels. This is the perfect addition for a cabriolet, for those concerned about drone, or for those interested in a quality flat 6 exhaust note without drawing to much attention. These are also ideal for anyone planning or running sport cats or bypass as they will offer more dampening so that extreme decibels are not experienced. These mufflers also pass the strict decibel limits set by the German TUV and they include TUV certification. Features: - + 8 crank hp & + 8 crank torque - weighs 35.7 lbs. (16.2 kg) - German v2a - x5crni18-10 - 1.4301 (t304) stainless steel for improv...(choose a part on the right to read more)
General Fitment 911 1998-05
From $1,807.30
Make a selection
"brombacher" (sound version) stainless steel mufflers
(3.6l model need end tips from 3.8l model, FVD 111 997 01 or FVD 111 997 03, larger pipe implementing equal more power).
Facts (based on 997s):
- + 10 crank hp & + 10 crank torque
- 2 1/2? (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The export sound version of our "brombacher" sport mufflers gives the 997 a more pronounced, aggressive sound compared to factory mufflers. These end-muffl...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,786.40
Make a selection
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary on 997.2 GT3
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggre...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $6,698.73
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with 2 x 90mm tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs ?hd? Sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) saving?s over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- intox...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,702.68
Make a selection
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche® owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, all of our exhaust systems meet the standards of the German independent testing agency tÜv; whose quality standards are among some of the strictest in the world.
Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result...(choose a part on the right to read more)
General Fitment 911 1970-73
$5,357.49
Make a selection
Brombacher race exhaust system for 997 GT3/rs (super sound) with rsr style tips & center muffler adapters to run stock center muffler.
Facts:
- + 25 crank hp & + 25 crank torque with use of stock center muffler.
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (90 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 34.7 lbs. (15.7 kg) this is the lightest stainless system in the Brombacherline !**
- 51.8 lb (23.5 kg) savings over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- bypass' center muffler with straight p...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$4,978.60
Make a selection
Exhaust system with valves for the 997 -08
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (incl...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,385.20
Make a selection
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- 1,000 degree celcius titanium
- equal length header set up for maximum torque gain
- weighs 48 lbs. (21,9 kg),
- 38.5 lb (17,5 kg) weight savings over stock
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) blue flamed titanium center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhaus...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$20,056.30
Make a selection
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
Special order item !
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (includes FVD software, sport airfilter and exhaust):
Max. Power - 283kw (3...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,826.40
Make a selection
More loud, pronounced and aggressive than our TUV version. This muffler is extremely civilized while cruising but unleashes lower deeper tones and a higher pitched rasp in the higher rpms under full load. This is the perfect choice if you are only planning to change your muffler. If you have sport cats this muffler will be considerably louder under full load but should still be civilized enough for cruising. - + 5 crank hp & + 4 crank torque. - total weight is 25 lbs. (11.24 kg). That is a savings of 15 lbs. - t 304 stainless steel (polished). - made in europe. - simple bolt on, modifications are not necessary. - no dme / ecu programming is necessary. We recommend purchasing replacing your aging muffler straps,...(choose a part on the right to read more)
General Fitment 911 1994-98
From $1,316.32
Make a selection
- + 25 crank hp & + 19 crank torque (manufacturer estimate, dyno testing information will be available shortly)
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 2 3/4"(70mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programm...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$9,179.50
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,731.90
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,581.70
Make a selection
"brombacher" exhaust system for 997.2 GT3/rs with valves for the best of both worlds.
facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- valved system with sound switch for quiet sound and export sound for the track.
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 90mm center exit tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open t...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $8,880.30
Make a selection
B&b started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded us impressive horsepower and torque gains throughout the entire power band. Headers and muffler are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed! Included in the kit is the header set, 1.625" or 1.75" primary tube diameter, with or without heat exchangers. Their proprietary twin inlet muffler built specifically for your street or race application is also included in this complete exhaust system. The kit for the naturally aspirated Porsche 911 includes all necessary hardware, gaskets and accessroies ne...(choose a part on the right to read more)
General Fitment 911 1984-86 911 1974-77
$3,579.69
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|